Civic.ly has four kinds of task, and they are easy to mix up because they work together. In one line: an inspection is a check, a defect is a problem you have found, a job is the work to put something right, and a routine is a round that repeats. This article explains each one, how they connect, and which to use, with worked examples.

The short answer

What it is Example How it finishes
Inspection A check of an asset, with a pass or fail result and an optional checklist Weekly check of the swings Passed or Failed
Defect A problem you have found: what is wrong, where, and whether it has been fixed A cracked swing seat Fixed or Closed
Job A piece of work to do, assigned to someone with a due date Replace the swing seat Done or Cancelled
Routine A group of inspections and jobs on one schedule, usually a round across several assets The weekly playground round Repeats; each task inside finishes on its own

All four are called tasks. In the web app they sit in the left-hand menu as Inspections, Jobs, Defects and Routines. The quick test: are you checking something, recording a problem, doing work, or scheduling a round?

How they fit together

They are linked, but none of them is compulsory, and you can start at any point. The full chain looks like this:

  1. A routine (or a one-off) creates an inspection each week.
  2. The inspector fails a checklist item. The app offers to raise a defect with the title pre-filled. Nothing is created unless you choose to create it, and the Passed or Failed record is saved on the asset either way.
  3. The defect records the problem, with a photo and a priority.
  4. From the defect, use Create Job for each piece of work: get a quote, order the part, fit it. Each job is linked to the defect automatically.
  5. When the jobs are Done, you set the defect to Fixed or Closed yourself. Finishing a job does not close the defect.
  6. Open the asset's Tasks tab to see the whole story. Open any one of the linked records and Related Records shows the others.

You can also raise a defect with no inspection behind it (you spotted it), and a job with no defect behind it (planned work).

Which one should I use?

You want to... Use
Check an asset's condition, or prove a check happened Inspection
Record that something is broken, unsafe or damaged Defect
Get something done: repair, clean, cut, empty, replace Job
Do the same checks or work on a schedule across several assets Routine
Report a fault on something another organisation looks after Defect only
Keep an eye on a problem that is not ready for repair Defect set to Monitoring, plus a scheduled job
Start something on the spot, with no schedule Tap + on the app and pick the type. No routine needed

Worked scenarios

These use invented names, but each one is a pattern councils run into every week. The last one covers work you start on the spot, with nothing scheduled.

1. A swing chain is worn

Rowan does the Monday play check at Ashwood Park. It is an inspection, created by the weekly routine. Rowan fails the "chains" item, accepts the offer to raise a defect, and adds a close-up photo. Back in the office the clerk sets the priority to High and uses Create Job twice: "Get quote for new chain" and "Fit new chain", both assigned to the contractor. The contractor marks them Done. The clerk then sets the defect to Fixed. The asset now tells the full story: a failed inspection, one defect, two jobs.

2. A bench slat is broken and nobody was inspecting

A councillor mentions it at a meeting. On the app, anyone can tap + then Defect, photograph it and save. There is no inspection and no need for one. The office later creates a job to repair it.

3. The bins are emptied every Tuesday

Emptying a bin is work, not a check, so this is a routine of jobs. Do not use inspections for it, because a bin round never "fails". If you also want a monthly look at the bins' condition, that is a second routine, of inspections. Compliance checks such as fire alarm tests are inspections too, because the compliance checklists only appear on inspections.

4. A bin owned by the district council has lost its lid

It is not yours to repair, so raise a defect and no job. Put the fault in the title ("Litter bin - no lid") and note who you told and when. You now have a dated record, which is useful if the problem is still there in three months.

5. A crack in a path you want to watch

It is not ready for repair, but you do not want to forget it. Set the defect to Monitoring at Low priority, then schedule a recurring job called "Check path crack" with a photo each visit. The status says it is being watched, and the jobs make the watching happen. See how to monitor a defect over time.

6. You clear fly-tipping yourself

Nothing is broken and you have done the work, so log a job. Choose General issue instead of an asset and add a photo. If instead you are reporting it for someone else to clear, raise a defect. The test is whether you are recording a problem or recording work.

7. Something comes up while you are out and about

None of the three needs a schedule or a routine behind it. You can start any of them on the spot: tap + on the app and choose Inspection, Job or Defect, then pick the asset, or General issue if there is no asset. After a storm, Rowan walks the park and creates an unscheduled inspection of the play area, creates a job to clear a fallen branch, and photographs a split bench as a defect. Each stands on its own and shows on the asset's Tasks tab beside the scheduled work.

Tips
  • Don't use a defect as the to-do. A defect says what is wrong. The job is the work. Keeping them apart gives you an honest history, and one defect can need several jobs.
  • Name the job for what needs doing. The title pre-fills with the asset name, so add "clear ivy" or "replace hinge" for whoever picks it up.
  • Set the status. Filling in a checklist does not finish the task. Mark it Passed, Failed or Done, or it stays on the list and later shows as overdue.
  • An open defect with no job behind it has stalled. Scan your Defects list for these now and then.

Common Questions

No. The app offers to raise one and pre-fills the title, and you choose. The failed inspection is saved either way. See if I mark an item as a fault, is a defect raised automatically?.

No. Jobs are ordinary tasks and can be created against any asset, or against General issue with no asset. Raising them from a defect just links the fix to the problem.

They are tracked separately on purpose. Set the defect to Fixed (you repaired it) or Closed (you will not) once you are happy.

If you are assessing condition and recording pass or fail, it is an inspection. If you are doing something (cleaning, emptying, cutting), it is a job. See when should a routine generate inspections or jobs?.

Yes. Each row in a routine has its own task type, so a skate park round can be six inspections plus one job to empty the bin. See how to create a routine.

Open an asset and use Create Inspection, Create Job or Create Defect, or tap + on the mobile app. See how to create an inspection, how to raise and manage a defect and fixing defects with jobs.